-16%

APC Smart-UPS RC 1000VA 230V Rack Mountable | SRV1KL-IN| Built in Battery

Share this product!

High density, double-conversion on-line power protection with scalable runtime
Includes: Basic UPS signalling RS-232 cable, USB cable, User Manual, Warranty card
2 Years Manufacturer Warranty.
Click here to view product specifications in APC website

₹29,990.00 ~~₹35,500.00~~

Compare

APC APC Smart-UPS Rack mountable RC 1000VA 230V

SRV1KL-IN Features

APC Smart-UPS Rack-mountable RC 1000VA 230V High Temp

High density, double-conversion online power protection with scalable runtime

Includes: Basic UPS signaling RS-232 cable, USB cable, User Manual, Warranty card

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Excellent footprint
Small UPS footprint provides maximum usage of valuable electrical room floorspace
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Generator compatibility
Allows you to recharge your battery while on generator power.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent Battery Charging
Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Sine wave output
Eliminates humming and heat generated when powering tube lights and fans
SmartSlot
Customize UPS capabilities with management cards.
Wide Input Voltage Window
Saves your battery power for when you really need it – during power cuts!

Smart-UPS On-Line Features & Benefits

Audible alarms

Provides notification of changing utility power and UPS power conditions

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

LED status indicators

Quickly understand unit and power status with visual indicators.

Serial connectivity

Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

SmartSlot

Customize UPS capabilities with management cards.

Network manageable

Provides remote power management of the UPS over the network.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable

Provides temporary battery power when the utility power is out.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Avoids costly power problems by keeping your IT equipment and data protected and available.

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Low operating and maintenance costs with proven reliability and intelligent battery management.

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Output

Output power capacity

800Watts / 1.0kVA

Max Configurable Power (Watts)

800Watts / 1.0kVA

Nominal Output Voltage

230V

Efficiency at Full Load

88.0 %

Output Frequency (sync to mains)

50/60Hz +/- 3 Hz

Output Frequency (not synced)

50/60 Hz +/-1 Hz

Other Output Voltages

208, 220, 240

Load Crest Factor

3 : 1

Topology

Double Conversion Online

Waveform type

Sine wave

Output Connections

(6) IEC 320 C13 (Battery Backup)

Bypass

Internal Bypass (Automatic and Manual)

Nominal Input Voltage

230V

Input frequency

40 – 70 Hz

Input Connections

IEC-320 C14

Cord Length

0.46meters

Input voltage adjustable range for mains operation

100 – 280 (half load)V

Number of Power Cords

Efficiency at Full Load

88.0 %

Maximum Input Current

6.0A

Input Power Factor at Full Load

0.99

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

4hour(s)

Nominal Battery Voltage

36V

Expected Battery Life (years)

1 – 2

Extendable Run Time

Efficiency in Battery Operation

83.0 %

Runtime

View Runtime Graph

View Runtime Chart

Interface Port(s)

DB-9 RS-232, Smart-Slot

Control panel

Multi-function LCD status and control console

Audible Alarm

Audible and visible alarms prioritized by severity

Available SmartSlot™ Interface Quantity

Surge energy rating

600Joules

Maximum Height

438MM, 43.8CM

Maximum Width

380MM, 38.0CM

Maximum Depth

88MM, 8.8CM

Net Weight

13.0KG

Shipping weight

17.8KG

Shipping Height

560MM, 56.0CM

Shipping Width

500MM, 50.0CM

Shipping Depth

180MM, 18.0CM

Color

Black

Operating Temperature

0 – 50 °C

Operating Relative Humidity

20 – 80 %

Operating Elevation

0-900meters

Storage Temperature

-20 – 50 °C

Storage Relative Humidity

0 – 90 %

Storage Elevation

0-3000meters

Audible noise at 1 meter from surface of unit

50.0dBA

Standard warranty

2 years repair or replace

Max Bypass Input Current

6.0A

SKU: SRV1KL-IN Category: Online UPS Tag: APC Online UPS

Weight	13.5 kg
Dimensions	8.8 × 38 × 43.8 cm
Brand	APC
Model No.	SRV1KL-IN
Builtin Battery Capacity	12V / 5AH
No. of Batteries	3
Backup Time	Upto 15 Mins.
Topology	Online UPS
Waveform Type	Sine wave
Output Power Capacity	800Watts / 1.0kVA
Input frequency	50/60 Hz +/- 3 Hz (auto sensing)
Nominal Input Voltage	230V
Interface Port(s)	DB-9 RS-232, RJ-45 10/100/1000 Base-T, Smart-Slot, Optional : SNMP Card ( SNMP Slot Provided)
Nominal Output Voltage	230V
In Box Accessories	Computer Interface Cable, Input Power Cable, Manual, Power Chute Software, UPS, Warranty Card
Warranty	2 Years Onsite Warranty
Product link in APC website	https://www.apc.com/shop/in/en/products/APC-Smart-UPS-Rackmountable-RC-1000VA-230V-High-Temp/P-SRC1KXLI

Click here to view more specifications in the manufacturer website

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

This product: APC Smart-UPS RC 1000VA 230V Rack Mountable | SRV1KL-IN| Built in Battery - ₹29,990.00

APC UPS Network Management Card | APV9601 - ₹10,490.00

UPS Support Pack | One time Onsite Visit | Preventive Maintenance (Standard) - ₹1,770.00

₹42,250.00 for 3 item(s)

We offer an Aggressive & Special price on this Product for limited Period!! For details, request on what’s app chat Now!!

APC Smart-UPS RC 1000VA 230V Rack Mountable | SRV1KL-IN| Built in Battery